2000L/H Fuel Oil Purifier 550kg Weight For Marine Oil Recycling System

Product Description:

KYDH204SD-23 waste oil centrifuge separator are mainly applied in:

1. the purification and clarification of the diesel, light fuel oil, heavy fuel oil

2. other mineral oil.used to remove the water, moisture, mechanical impurities

3. some harmful substances of the oil.

Tenchical paramete:

Main Feature :

1. This model are automatic slagging type, high separation efficiency, no need to disassemble

to slagging.

2. Can be automatic controlled according to requirements which greatly reduce the lab orintensity

of the operating.

3. This machine by the accurate calibration balancing,little vibration,can be long running and operated safety and reliable.

Work principle :

Use the differences in density between the different substances, the centrifugal force separation and extraction of physical separation techniques. In the gravitational field, known as gravity separation, in centrifugal field called the centrifugal separation.

● Gravity separation

Big density solid particles of the mixture slowly sinking under the gravitational attraction, the mixture become clear and the density small of liquid is up. Gravity separation takes a long time and occupies a lot of area. It's different to separate ,especially when the density is close and viscosity

● Centrifugal separation

Mixture with different density become a circular ring under the force of centrifugal in a high -sped rotating drum, the particle with max density move outward to the wall of the drum while the small density of liquid in the innermost layer. Centrifugal separation just take only a short time that can get the effect of gravity separation because the centrifugal force formed by the high -speed rotation of drum is much bigger than gravity

● Separation Space

There are a ground of discs within the drum of the disc separator which can divided the drum space into many thin-layer , it greatly shorten the settling distance and improve the separating effect..

Movement route of the particles C in the separation space Reference Figure 1-3

If any particles between A and B can reach the internal surface of the disc can be separated.

● Separation

Usually, the separator is divided into two types. One is used for solids and two liquid phases from each other in one single continuous process, it is so called purifier. The other is used for solids and one liquid phase from each other, it is so called clarifier.

Packing & Shipping:

The parts are bolted to the wooden cases. with layers of plastic and standard wooden cases

for packaging, it provide safe and convenient shippings.